Cold Room Design and Engineering

Professional cold room design and engineering in Kenya by Refitec Kenya. Custom chiller and freezer room design, load calculations, panel layouts, and refrigeration sizing. Call +254 704 843 613.
With electricity costs rising and health inspection standards tightening across Kenyan counties, engineered design has become the single most important investment in any cold storage project. A room that is designed around the actual product load, traffic pattern, and local climate costs less to run every day for its entire fifteen-to-twenty-year life. Refitec Kenya’s design engineers work from first principles on every project, large or small, whether a compact hotel chiller or a multi-chamber distribution facility, and remain available to the client through construction, commissioning, and beyond.

Cold Room Design and Engineering Services by Refitec Kenya

A cold room that is poorly designed will waste energy, fail to hold temperature, and shorten the shelf life of the products stored inside it. Professional cold room design and engineering ensures that every component, from the insulated panels to the refrigeration system, is correctly sized and matched to the intended application. Refitec Kenya provides cold room design and engineering services for hotels, restaurants, supermarkets, butcheries, pharmaceutical distributors, horticultural exporters, and cold chain logistics companies in Nairobi, Kiambu, Machakos, Thika, Mombasa, Nakuru, and the rest of Kenya.

Why Engineering Design Matters

Cold room engineering is a precise discipline. The design must account for the product load, the temperature of goods entering the room, the frequency of door openings, the ambient conditions of the installation site, and the insulation properties of the panels. If the refrigeration system is undersized, the room will never reach temperature. If it is oversized, the compressor will short-cycle, consume excessive electricity, and wear out prematurely. Our engineers perform detailed heat load calculations before recommending any equipment, ensuring that the installed system achieves the required pull-down and holds a stable temperature, whether at plus two degrees Celsius for a chiller or minus twenty degrees Celsius for a freezer room.

Our Design and Engineering Process

1. Site survey and consultation. We visit the premises, measure the available space, assess power supply capacity, floor conditions, and access routes, and discuss the products to be stored and their storage temperatures.
2. Heat load calculation. Our engineers calculate the transmission load through the panels, the product load, the infiltration load from door openings, and the internal loads from fans and lighting.
3. System selection. We size the condensing unit, evaporator, panel thickness, and door type, and produce a layout that maximizes usable storage volume.
4. Documentation. We provide drawings, equipment schedules, and a transparent costed proposal for approval before installation begins.
5. Installation and commissioning. Our certified technicians build the room, install the refrigeration system, and commission it with documented temperature performance tests.

Applications We Design For

We design and engineer walk-in chillers for fresh produce, dairy, and beverages; freezer rooms for meat, fish, and frozen foods; blast freezers for rapid freezing; dual-temperature rooms; pharmaceutical cold rooms requiring validated temperature uniformity; and agricultural produce stores for flowers, vegetables, and fruits for export. Each design complies with food safety and health inspection requirements in Kenya.

Why Choose Refitec Kenya

Refitec Kenya combines engineering experience with certified technicians, genuine parts, and a commitment to same-day service. Every project is backed by warranty and after-sales support.

Frequently Asked Questions

How long does a cold room design project take? A typical design and engineering phase takes three to seven working days after the site survey, depending on complexity, followed by installation that may run from a few days for a modular room to several weeks for a large engineered facility. Do you design rooms for existing buildings? Yes. Many of our projects fit cold rooms into existing kitchens, stores, and basements, and we adapt the layout, panel schedule, and door positions to the available space while preserving adequate refrigeration performance. Can you verify an existing cold room that is underperforming? Yes, we audit existing rooms, measure the actual heat loads and system performance, and issue corrective engineering recommendations covering insulation, refrigeration sizing, and airflow.

Refitec Kenya serves clients in Nairobi, Kiambu, Machakos, Thika, Nakuru, Mombasa, Eldoret, Kisumu, Nyeri, and countrywide, with engineers available for same-day response in the Nairobi metropolitan area.

Contact Us Today

For professionally engineered cold rooms that hold temperature reliably and consume less energy, call Refitec Kenya today on +254 704 843 613 and request a free site survey and quotation.