TV Repair in Manyatta Kisumu | Refitec – Your Trusted TV Repair Service Center Near Me

Fast. Affordable. Reliable. Refitec brings your screen back to life — right here in Manyatta, Kisumu.

If your TV has suddenly gone blank, the sound has disappeared, or the picture looks like it’s having a bad day, you’re not alone. It happens to the best of us. The good news? You don’t have to travel far or spend a fortune. Refitec TV Repair Service Center is right here in Manyatta, Kisumu — and we fix TVs every single day.

Whether it’s a Samsung, LG, Sony, Hisense, Skyworth, Syinix, or any other brand, our technicians have seen it, diagnosed it, and fixed it. We believe your TV deserves a second chance — and so does your wallet.

📞 Call or WhatsApp: 0704843613

 Common TV Problems

Scroll down for detailed step-by-step guides on each issue below.

If you can’t find your problem above, call or WhatsApp us on 0704843613 — we’ll advise you for free.

🔍 About Refitec – TV Repair Service Center Near Me in Manyatta, Kisumu

Refitec is a professional electronics repair center based in Manyatta, Kisumu. We specialize in diagnosing and repairing all types of televisions — from old CRT sets to the latest OLED and Smart TVs. Our team of certified technicians uses genuine spare parts and modern diagnostic tools to ensure every repair is done right the first time.

We understand that when your TV breaks down, it disrupts your home. That’s why we prioritize quick turnaround times, transparent pricing, and honest advice. We won’t tell you to replace something that can be repaired.

Why Residents in Manyatta Choose Refitec

• ✅ Locally based — no need to travel to town
• ✅ All TV brands and models accepted
• ✅ Free diagnosis on most TV faults
• ✅ Genuine spare parts used
• ✅ Affordable and transparent pricing
• ✅ Experienced and certified technicians
• ✅ Quick turnaround — most repairs done same day or within 24 hours
• ✅ Warranty offered on repairs

📞 Call or WhatsApp: 0704843613

🛠️ TV Problems We Fix — Detailed Guides

1. TV Won’t Turn On

Quick Answer:

Check that the power cable is properly plugged in and the wall socket is working. If it still won’t power on, the problem is likely internal — bring it to Refitec.

Detailed Steps:

Step 1 — Check the basics first Before panicking, confirm the power cable is firmly plugged into both the TV and the wall socket. Try a different socket to rule out a dead outlet.

Step 2 — Try the remote and the manual button Some TVs power on via a button on the side or bottom of the set. Press it manually. If the TV responds to the button but not the remote, the remote is the issue — not the TV.

Step 3 — Look for a standby light If a red or orange standby light is on, the TV is receiving power but not turning on fully. This usually points to a faulty main board or power supply board.

Step 4 — If nothing works, don’t force it Repeatedly pressing the power button on a faulty TV can cause further damage. At this point, it’s time to call Refitec. Our technician will run a full power board diagnostic and replace only what’s needed.

📞 Refitec, Manyatta Kisumu — 0704843613

2. TV Has No Picture But Has Sound

Quick Answer:

This is almost always a backlight failure — a very common and repairable fault. Don’t throw away the TV. Refitec fixes this regularly.

Detailed Steps:

Step 1 — Shine a torch on the screen In a darkened room, shine a bright flashlight or phone torch at the screen while the TV is on. If you can faintly see an image, the backlight strips have failed. The panel itself is fine.

Step 2 — Understand the fault Modern LED TVs use LED strips behind the screen for lighting. When these strips burn out, the screen goes dark even though the rest of the TV works perfectly.

Step 3 — Do not attempt a DIY fix Replacing LED backlight strips requires disassembling the TV screen and working with delicate ribbon cables. One wrong move can crack the panel — turning a cheap fix into an expensive one.

Step 4 — Bring it to Refitec Our technicians replace faulty LED backlights professionally. In most cases, this repair costs a fraction of buying a new TV.

📞 Call or WhatsApp: 0704843613

3. TV Has Lines or Stripes on the Screen

Quick Answer:

Vertical or horizontal lines on a TV screen usually indicate a T-Con board fault or a loose ribbon cable — both are repairable at Refitec.

Detailed Steps:

Step 1 — Note the type of lines

• Vertical lines → often a ribbon cable or T-Con board issue
• Horizontal lines → usually T-Con board or panel fault
• Lines that appear after the TV warms up → likely a failing T-Con board

Step 2 — Gently press the sides of the frame Sometimes, pressing lightly on the bezel near the lines makes them disappear temporarily. This points to a loose cable connection — a relatively simple repair.

Step 3 — Avoid DIY screen repairs TV panels are extremely fragile. Attempting to open the screen yourself risks permanent panel damage. The repair cost then jumps significantly.

Step 4 — Visit Refitec for a diagnosis We’ll assess whether it’s a T-Con board (replaceable and affordable) or a panel issue. We give you an honest cost estimate before any work begins.

📞 Refitec TV Repair, Manyatta Kisumu — 0704843613

4. TV Keeps Switching Off on Its Own

This is usually caused by overheating or failing capacitors on the power board. It’s repairable — bring it in before it gets worse.

Detailed Steps:

Step 1 — Check the ventilation Make sure the TV is not enclosed in a tight space or cabinet. TVs need airflow. If it’s been running hot, let it cool down and ensure there’s space around it.

Step 2 — Check your settings Some TVs have a “Sleep Timer” or “Auto Power Off” setting that turns them off after a set time. Check your TV menu settings to rule this out.

Step 3 — Listen and observe If the TV switches off with a clicking sound, or if you notice bulging or leaking capacitors (only visible when opened), the power board needs attention.

Step 4 — Don’t ignore it A TV that keeps switching off is giving you a warning. If left unrepaired, capacitor failure can eventually damage other components, making the repair more expensive.

Step 5 — Bring it to Refitec We replace faulty capacitors and service power boards at very reasonable prices. Most of these repairs are completed within the same day.

📞 Call or WhatsApp: 0704843613

5. TV Shows “No Signal”

Quick Answer:

First check your cables and input source. If everything looks fine, the issue could be with your decoder, antenna, or the TV’s input board.

Detailed Steps:

Step 1 — Check your input source Press the Source or Input button on your remote and make sure the correct source is selected (e.g., HDMI 1, AV, or TV antenna).

Step 2 — Check all cables Unplug and firmly re-plug all HDMI, AV, or coaxial antenna cables. A loose connection is often the culprit.

Step 3 — Test with a different device If possible, connect a different device (e.g., a phone via HDMI adapter) to the same port. If it works, the problem is with your decoder or antenna — not the TV.

Step 4 — Re-scan for channels If using an antenna, go to Settings → Channel Scan and run an auto-search for channels.

Step 5 — If the problem persists A “No Signal” issue that persists on all inputs may indicate a faulty HDMI port, input board, or tuner. Refitec can diagnose and repair this efficiently.

📞 Refitec, Manyatta Kisumu — 0704843613

6. Smart TV Won’t Connect to Wi-Fi

Quick Answer:

Restart both the TV and your router first. If that doesn’t help, the TV may need a firmware update or has a faulty Wi-Fi module.

Detailed Steps:

Step 1 — Restart everything Turn off the TV and unplug it for 60 seconds. Do the same with your Wi-Fi router. Plug both back in and try connecting again.

Step 2 — Check your Wi-Fi password and band Some Smart TVs only support 2.4GHz Wi-Fi and won’t connect to 5GHz networks. Confirm your TV is connecting to the correct band and that the password is correct.

Step 3 — Forget and re-add the network On the TV, go to Settings → Network → Wi-Fi → select your network → choose Forget → then reconnect from scratch.

Step 4 — Check for software updates If the TV connects intermittently, it may need a firmware update. Go to Settings → About → Software Update.

Step 5 — If none of this works A TV that refuses to connect despite all troubleshooting may have a damaged Wi-Fi module. Refitec can replace it and restore full Smart TV functionality.

📞 Call or WhatsApp: 0704843613

📍 Where to Find Refitec in Manyatta, Kisumu

We are conveniently located in Manyatta, Kisumu — making us the closest and most accessible TV repair service center near you if you live in Manyatta, Nyalenda, Kondele, Obunga, Bandani, or the surrounding areas.

No need to carry your TV all the way to the CBD. We are right here in the neighborhood, and we treat every repair with the same seriousness whether it’s a small 24-inch screen or a large 65-inch Smart TV.

📞 Contact Refitec Today

Don’t let a broken TV ruin your day. Call or WhatsApp us right now and let’s get it fixed.

📱 Call or WhatsApp: 0704843613

• Location: Manyatta, Kisumu
• Services: TV Repair, Screen Replacement, Backlight Repair, Board Replacement, Smart TV Repair, All Brands
• Hours: Monday – Saturday | 8:00 AM – 6:00 PM

Refitec — Your Trusted TV Repair Service Center in Manyatta, Kisumu. We fix it right, the first time.