Reliable Washing Machine Repair in Spring Valley Estate, Nairobi | Refitec 0704843613
DESCRIPTION: Learn how to reset a Whirlpool washing machine step by step. Simple, clear instructions to fix common errors, power issues, and unresponsive Whirlpool washers.
HOW TO RESET A WHIRLPOOL WASHING MACHINE – STEP BY STEP GUIDE
How to reset a Whirlpool washing machine is one of the most searched solutions when a washer stops working, shows error codes, or refuses to start. This guide is clear, direct, and practical, designed to help you reset your Whirlpool washer correctly and safely.
Why You May Need to Reset a Whirlpool Washing Machine
Resetting helps clear temporary faults caused by:
- Power interruptions
- Error codes on the display
- Washer not starting or stuck mid-cycle
- Control panel not responding
- Washer not draining or spinning properly
A reset restores the washer’s control board to factory working conditions.
Step-by-Step Guide: How to Reset a Whirlpool Washing Machine
Step 1: Turn Off the Washing Machine
Switch off the washer using the power button.
Step 2: Unplug From Power
Disconnect the washing machine from the wall socket completely.
This step is critical when learning how to reset a Whirlpool washing machine correctly.
Step 3: Wait 10–15 Minutes
Leave the machine unplugged for at least 10 minutes.
This allows residual electricity to drain from the control board.
Step 4: Plug the Washer Back In
Reconnect the power cable firmly into the socket.
Step 5: Turn the Machine On
Press the power button to restart the washer.
Step 6: Run a Test Cycle
Select a short wash cycle or rinse cycle and start the machine.
If the washer runs normally, the reset was successful.
How to Reset a Whirlpool Washing Machine Using the Control Knob
Some Whirlpool top-load models use a dial reset method.
Steps:
- Turn the knob to the Normal position
- Turn it left → right → right → left → right
- Press Start
If done correctly, indicator lights will flash, confirming the reset.
How to Reset a Whirlpool Washing Machine After an Error Code
| Error Issue | Reset Action |
|---|---|
| Washer won’t start | Power reset (unplug method) |
| Error code showing | Power reset + test cycle |
| Buttons not working | Unplug for 15 minutes |
| Washer stuck mid-cycle | Reset then drain cycle |
If error codes return after resetting, professional repair is recommended.
Models This Reset Method Works On
This how to reset a Whirlpool washing machine guide applies to:
- Whirlpool top-load washers
- Whirlpool front-load washers
- Whirlpool automatic washing machines
- Whirlpool digital & manual models
When Resetting Does NOT Fix the Problem
Resetting will not solve:
- Faulty control boards
- Damaged door locks
- Motor or pump failure
- Wiring issues
If the problem persists, expert diagnosis is needed.
Professional Whirlpool Washing Machine Repair in Kenya
If your washer still isn’t working after following how to reset a Whirlpool washing machine, let professionals handle it safely and quickly.
Call Refitec today for expert Whirlpool washing machine repair.
📞 Refitec – 07048433613
Fast response, professional technicians, and reliable appliance repair you can trust.