Water leakage from your refrigerator is not only inconvenient but can also cause water damage to your floors and cabinetry. Identifying the source of the leak is crucial for proper repair.
Common Causes: Water leaks typically originate from a clogged defrost drain, damaged water supply line, cracked drain pan, or improper leveling of the refrigerator. When the defrost drain becomes blocked with food particles or ice, water from the defrost cycle has nowhere to go and overflows into the refrigerator or onto the floor. A damaged water inlet valve or loose connections in refrigerators with water dispensers or ice makers can also cause leaks.
Possible Remedies: First, locate the defrost drain, usually found at the back of the freezer compartment or refrigerator section. Flush it with warm water using a turkey baster or small funnel to clear any blockages. If your refrigerator has a water dispenser or ice maker, inspect all water line connections for tightness and check for visible cracks or damage.
Ensure your refrigerator is level from front to back and side to side. A slight tilt backward helps water flow properly toward the drain. Check the drain pan underneath the refrigerator for cracks or damage. Empty and clean the pan if necessary.
Professional Service from Refitec.co.ke: The expert team at Refitec.co.ke has extensive experience in identifying and fixing all types of refrigerator leaks. We use specialized tools to clear stubborn drain blockages, replace damaged water lines and inlet valves, and repair or replace cracked drain pans. Our technicians ensure proper installation and leveling to prevent future leaks. We provide comprehensive leak detection services that address the root cause, not just the symptoms, ensuring a permanent solution to your water leakage problems.
- Ice Maker Not Producing Ice
An ice maker that stops producing ice is a common frustration, especially during hot weather when ice demand is highest. Several mechanical and electrical issues can cause this problem.
Common Causes: The most frequent causes include a frozen water supply line, faulty water inlet valve, defective ice maker assembly, or improper temperature settings. If the freezer temperature is above -15°C, the ice maker won’t function properly. A clogged water filter can restrict water flow to the ice maker. Additionally, the ice maker’s shut-off arm may be stuck in the “off” position, or the control module may have failed.
Possible Remedies: Start by checking if the ice maker is turned on and the shut-off arm is in the down position. Verify that the freezer temperature is set to -18°C or lower. Inspect the water supply line for kinks or ice blockages. If frozen, you can thaw it using a hairdryer on low heat, being careful not to melt any plastic components.
Replace the water filter if it hasn’t been changed in the last six months, as a clogged filter significantly reduces water flow. Check if water flows to the dispenser; if it does, the supply line is likely clear. Listen for the water inlet valve to click when ice-making cycles begin.
Professional Service from Refitec.co.ke: Refitec.co.ke offers specialized ice maker repair and replacement services. Our technicians diagnose electronic control failures, replace faulty water inlet valves, repair mechanical components, and troubleshoot electrical connections. We stock genuine replacement parts for all major refrigerator brands, ensuring compatibility and reliability. Our service includes thorough testing to ensure your ice maker produces ice consistently. With affordable rates and quick turnaround times, we’re your go-to solution for ice maker problems in Kenya.
- Excessive Frost Buildup in Freezer
While some frost in a freezer is normal, excessive accumulation indicates a malfunction that requires attention. Heavy frost buildup reduces storage space and makes your freezer work harder.
Common Causes: Excessive frost typically results from a malfunctioning defrost system, including a faulty defrost heater, defrost thermostat, or defrost timer. When these components fail, the automatic defrost cycle doesn’t activate, allowing frost to accumulate on the evaporator coils. A damaged door gasket that allows warm, humid air to enter is another common cause. Leaving the freezer door open frequently or for extended periods also contributes to frost buildup.
Possible Remedies: Begin by manually defrosting your freezer. Unplug the unit, remove all food items, and allow the ice to melt completely. Place towels around the base to absorb melting water. Once defrosted, inspect the door gasket carefully for any tears, gaps, or loss of flexibility. Clean the gasket with warm soapy water and ensure it seals properly when the door closes.
Check that the freezer door closes automatically when opened halfway, indicating proper leveling. Avoid keeping the door open unnecessarily and ensure food items don’t prevent the door from closing completely. If frost returns quickly after manual defrosting, the defrost system components likely need professional attention.
Professional Service from Refitec.co.ke: At Refitec.co.ke, we specialize in defrost system repairs. Our technicians test and replace defrost heaters, thermostats, and timers using diagnostic equipment to pinpoint failures accurately. We also replace damaged door gaskets with high-quality seals that ensure airtight closure. Our comprehensive service includes checking the defrost control board and ensuring all components work harmoniously. We provide preventive maintenance tips to help you avoid future frost accumulation issues, keeping your freezer running efficiently.